Pylon & pole signs
Full structural design for free-standing pylon signs — pole, footing, and cabinet attachment. We engineer in steel or aluminum, round or square or I-beam, with pier/caisson or spread-footing foundations sized for your soil and wind zone.
Get Your Quote
Send us the project details you have. We'll review the installation and provide a quote.
What we engineer
Common configurations we work on every week.
Single-pole pylon signs from 8 ft to 50+ ft
Multi-cabinet stacks with shared pole
Twin-pole and I-beam configurations
Pier/caisson or spread footing foundations
Verification of existing pole/base for new cabinet
What we need from you
Send these with your submission and we'll have everything to generate a fast, accurate quote.
Pricing for this sign type
Starting prices. Final quote tailored to your specific project.
| Type | Description | Starting price |
|---|---|---|
| Pole sign | Up to 15 ft | $175 |
| Pole sign | 15 ft to 25 ft | $250 |
| Pole sign | 25 ft to 35 ft | $350 |
| Pole sign | 35 ft to 45 ft | $400 |
| Pole sign | 50 ft to 65 ft | $525 |
| Pole sign (existing) | Verification of existing pole / base | Custom quote |
Not sure which category your project falls into? Submit your project details and we'll review it.
What our service includes
Every project ships with everything your permit office needs.
Who uses our service
We work with sign professionals and property stakeholders nationwide.
Sign companies building and installing pylon signs
General contractors managing multi-tenant commercial sites
Shopping center owners adding or replacing pole signs
Franchise operators needing branded pylon signage
Property developers planning freestanding site identification
Engineering notes
A few things we always check — and what code references we follow.
Pier depth is sized to resist overturning moment from the design wind on the exposed sign face plus pole.
Anchor bolt patterns are detailed for the chosen foundation type with embedment and edge distance per ACI 318.
Pole sizing follows AISC 360 for steel or ADM for aluminum.
How it works
Four steps from submission to stamped drawings.
Submit Your Project
Send your sign dimensions, project address, wall type, photos and available drawings.
Receive a Quote
We review the project and confirm the engineering scope and price.
Engineering
We develop the attachment, anchors, blocking and applicable structural calculations.
Stamped Drawings
Receive your stamped engineering package, typically within 24–36 hours.
Frequently asked questions
Common questions about pylon & pole signs and engineering.
What heights can you engineer pylon signs for?+
We regularly engineer pylon signs from 8 ft up to 50+ ft. Taller installations are handled on a case-by-case basis with additional wind and foundation considerations.
Do you design the foundation?+
Yes. Every pylon sign package includes a foundation design — either pier/caisson or spread footing — sized for your soil conditions and wind zone.
Can you verify an existing pole for a new cabinet?+
Yes. Send us photos and any prior drawings of the existing pole and base, and we'll analyze whether it can support the new cabinet or if reinforcement is needed.
What pole materials do you design with?+
We design in steel or aluminum, round or square tube, or I-beam configurations depending on the project requirements and local code.
Get your pylon & pole signs engineered
Sealed drawings in 24–36 hours. Submit your project to start.
from $175 · Typical 24–36 hour turnaround
Submit a project